Payment & Shipping Terms:
|Product Name:||Foldable Boom Barrier Gate||Rod Type:||Straight/ Foldable/ Connenting / Extendable Rod|
|Size Of Product:||340*280*1000 Mm||Package Size:||420*360*1080 Mm|
|Type:||Straight Arm Barrier Gate||Power Supply:||AC220V±10%50HZ AC110V±10%50HZ/60HZ|
|Rail Length:||1- 6 Meter||Material:||Cold Rolled Mild Steel/stainless Steel|
retractable barrier gate,
car park boom gates
Bluetooth Remote Control Automatic Boom Barriers 3~6 Meter Optional Boom And IP 54 Security
Intelligence parking Barrier gate with special motor main controller with multiple running mode optional . Use of advanced anti-aging waterproof ,durable ,do not fade. yellow ,green ,blue can be optional . reasonable structure design , used for management lane, divide into straight pole , fold pole,fence rod type.
|Rail material||Aluminum Alloy|
|Motor speed||30 r/min|
|Power supply||AC220V±10%50 HZ AC110V±10%50 HZ/60 HZ|
|Housing box material||cold rolled mild steel/stainless steel|
|Rail length||1- 6 meter|
push button/remote control/access control system like charging system or RFID card reader
|Housing color||orange / blue/ yellow / red|
|Working environments||indoor, outdoor|
|Relative humidity||≤90%, no condensing|
|Rated power||70 W/150 W|
|Bumping bounce back||N/A|
Standard functions & features:
1. Anti-collision protects boom arm (optional)
Once anti-collision mechanism installed, it will protects the boom arm not to be damaged once boom arm was collided by a vehicle.
2. Safety--- Anti-hit by pressure resistance bounce
While moving down,arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.
3. Safety--- Anti-hit by Loop Detector (Optional)
While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.
4. Safety--- Anti-hit by IR photocell (Optional)
While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.
5. Safety--- Anti-hit by “Opening Priority”
If a vehicle is coming while arm moving down, the arm will immediately go back to vertical position once a open command is given, which protect the vehicle not to be hit by arm.
6. Closing Priority
While arm moving up, the arm will immediately go down once a close command is given.
7. Automatically close after the given time
Once this function is set “ON”, the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.
8. Automatically Close by loop detector (Optional)
If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered.
9. Automatically open by loop detector (Optional)
If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered.
10. Manually control in case of no power
Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.
11. Boom to open up fully or close down in case of power failure
If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical plane beyond 45 degree. If power failure occurs during boom opening, boom will automatically continue to open up fully if the angle between boom and level surface beyond 45 degrees.
12. Anti-condensation in cold climate
The barrier remains low power consumption even without closing and opening input, which will keep the motor in normal temperature. The lubricant will not be frozen so that the barrier will keep working in frozen environment.
13. Transparent plastic covers on Control Board
A transparent plastic covers on the Control Board to makes Control Board water proof and dust proof, also protects operator.
1. Avoid vibrating caused by boom’s running;
2. Only 90 degree running for the boom, to avoid the accident of 360 degree running caused by abnormal
3. Special movement mechanism, with no gear or belt; no need for maintenance; stable performance and
4. Specially-designed balance mechanism, which makes boom start slowly, run quickly and stop slowly.
5. Specially-designed low-speed aluminum-casing motor, integrated gearbox with low noise & quick
6. Intelligent over- heat protection system for driving mechanism, to control motor’s temperature and
avoid damaging easily during frequent usage.
1. All items have 24 month quality guarantee.
2. Custom design shape and logo, for large amount, custom logo available for free.
3. Supported by professional engineers.
4. Special discount of our distributors or agents in their area.
5. Packing in standard export carton, suggest you pack it by wooden case to protect the products
6. CE, ROSH available.
7. Friendly and professional customer service people help you in 16 hours.
1. Except the product, also offer the RFID card reader control system.
2. Only the boom barrier gate, you can use the button or remote controller to control it.
3. We offer a complete set of the tolling parking system, including barrier gate, ballot boxes, vehicle detector, Entrance control system main board, System special switching power supply, parking lot system
management software with dongle , etc.
Use & operation safety notes:
1. During arm going down, do not place anything under the booms; and no body is allowed to standing or
walking under the boom.
2. Normally, do not adjust positions of mechanical limit switch or photo electric limit switch.
3. When power cuts, first, turn off the power connection; then adjust the boom to vertical position by
turning the manual swing manually.
4. Normally, users can not change the wire layout inside barrier gate. Please just connect the gate with
220 V power supply.
5. The power supply system should be equipped with leakage breaker (≥10A).
6. Normally, do not increase or decrease the length or weight of the boom, to avoid losing balance. If
necessary, professional staff is required.
7. During running, do not open the case-cover or case-door, to avoid accident.
Popular items for your choice:
Contact Person: Vivian