Payment & Shipping Terms:
|Package Size:||420*360*1100mm||Type:||Straight Arm Barrier Gate|
|Power Supply:||AC220V±10%50HZ AC110V±10%50HZ/60HZ||Rail Length:||1- 6 Meter|
|Material:||Cold Rolled Mild Steel/stainless Steel||Gross Weight:||56KG|
|Product Name:||Straight Bar Boom Barrier Gate||Rod Type:||Straight/ Foldable/ Connenting / Extendable Rod|
|Size Of Product:||340*280*1030mm|
vehicle barrier gates,
car park boom gates
Highroad High Reactin Speed Boom Barrier Gate With 1 - 6 Meter Length For Intelligent Parking System
Functions and features:
1. Only 90 degree running for the boom, to avoid the accident of 360 degree running caused by abnormal failures.
2. This equipment is controlled in wireless method, which makes its operation safe & convenient. What you need to do is to connect the equipment with 220 V power supply and earth the exterior case; then the system could start working without any wire arrangement or matching.
3. Specially-designed low-speed aluminum-casing motor, integrated gearbox with low noise & quick
4. Intelligent over-heat protection system for driving mechanism, to control motor’s temperature and avoid damaging easily during frequent usage.
5. Special movement mechanism, with no gear or belt; no need for maintenance;stable performance and long life-span.
6. Specially-designed balance mechanism, which makes boom start slowly, run quickly and stop slowly.
7. Avoid vibrating caused by boom’s running.
8. The gate is equipped with multiple communication interfaces. It could be connected with vehicle-detector, IR co-irradiator or other accessories, to meet the safety requirement; and charging system could also be connected to realize automatic management (optional).
1. Characteristics: Special movement mechanism, with no gear or belt; no need for maintenance; stable
performance and long life- span. Only 90 degree running for the boom, to avoid the accident of 360
degree running caused by abnormal failures.
2. Main functions: This equipment is controlled in wireless method, which makes its operation safe &
convenient. What you need to do is to connect the equipment with 220V power supply and earth the
exterior case; then the system could start working without any wire arrangement or matching.
|Rail material||Aluminum Alloy|
|Rail length||1- 6 meter|
push button/remote control/ access control system like charging system or RFID card reader
|Housing color||orange / blue/ yellow / red|
|Housing box material||cold rolled mild steel/stainless steel|
|Motor speed||30 r/min|
|Working environments||indoor, outdoor|
|Relative humidity||≤90% no condensing|
|Bumping bounce back||N/A|
1. Offer the ODM/OEM service,could make product shape design,custom logo,custom package.
2. We can provide not only product, but also system software management. Save your time and cost.
3. Special service from Goldantell:
For repairing,no need you return back product,only need you take a video,our engineer will instruct you,if
spare parts was damaged in 1 year,we will send you spare parts by fastest express,you no need bear any
4. Our product with CE approved and with good feedback in the Europe.
5. Friendly and professional customer service people help you in 16 hours.
Usually supplied schemes:
1. Except the product, also offer the RFID card reader control system.
2. Only the boom barrier gate, you can use the button or remote controller to control it.
3. We offer a complete set of the tolling parking system, including barrier gate, ballot boxes, vehicle
detector, Entrance control system main board, System special switching power supply, parking lot system
management software with dongle , etc.
1. When power cuts, first, turn off the power connection; then adjust the boom to vertical position by
turning the manual swing manually.
2. Normally, do not increase or decrease the length or weight of the boom, to avoid losing balance. If
necessary, professional staff is required.
3. During running, do not open the case-cover or case-door, to avoid accident.
4. Normally, users can not change the wire layout inside barrier gate. Please just connect the gate with
220V power supply.
5. The power supply system should be equipped with leakage breaker (≥10A).
6. During arm going down, do not place anything under the booms; and no body is allowed to standing or
walking under the boom.
7. Normally, do not adjust positions of mechanical limit switch or photo electric limit switch.
More items for your choice:
Contact Person: Vivian